J6H130 - Jumping EXCELLENT
Technical data and description:
The trampoline is built from a round steel profile, with a wall thickness of 1.5 mm, which ensures sufficient durability. The bearing capacity of the trampoline is up to an incredible 120 kg, while its weight does not exceed 11 kg.
As the basic weight-bearing mechanism, the frame is the most important part of the trampoline. It absorbs considerable energy and directly affects the quality of springing movements during the exercising. The frame employs a proprietary shape which has been designed to suit its unique function and boasts a level of the steel quality that meets our uncompromising demands and strict manufacturing regulations.
Legs are ended with special rubber adjusters, which protect floors of all types against destruction and against undesired streaks.
Formed by a special polypropylene fabric, which excels in its resistance against UV radiation. The jumping area is enclosed by a 5cm wide bright green rim. The spokes of the trampoline have 54 pieces of mesh, through which the special stirrups are threaded, to which the flexible rubber rope is attached.
Its diameter is 7 mm. The rope has a special polyethylene monofilament, which excels due to its low ductility and high bonding strength. Each rubber rope end is attached to the stirrup and secured by a collet, so that it does not get dragged. This comfortable system ensures unique suspension for the Trampoline Mat, and if damaged, it can be easily replaced. Another advantage is its resistance to abrasion.
A round steel profile with a thickness of 1.5 mm and consists of two parts. Two handle-size variants are offered for this trampoline.
Maximum load/load bearing capacity:
120 kilograms. Overloading leads to excessive stress on the pliable parts of the stringing. If overloaded, the lifespan and the pliable aspects of the trampoline may be detrimentally affected.
Number of users simultaneously using the trampoline:
The trampoline may be used by a maximum of one person at a time. A trained Jumping instructor who is authorized to lead Jumping exercising lessons is always responsible for the safe operation of the trampoline.
Checking and maintenance:
Regular checking of the pliable parts and handlebars is necessary for optimum trampoline performance. Before each exercise session, we visually check all parts of the trampoline. After each session it is advisable to wipe the surface of the trampoline with a disinfectant and, with the help of a paper handkerchief, to remove any residual sweat from the exposed surface. Every month we check the state of the rubber ropes (for signs of wear and over-stretching) and ensure that the eyelets in the trampoline stringing have not been torn out).
Putting the appliance out of order:
In the event that any defect in a trampoline is detected, the trampoline must be taken out of service, distinctively marked with tape, and kept out-of-bounds until the necessary repair work is accomplished.
Residual risks and prohibited methods of usage:
Before exercising the handlebars must always be installed. The Jumping PROFI trampoline is not intended to be used by children under 14 years of age.
In compliance with current regulations, defunct appliances are dismounted and divided into their component parts (steel, rubber, polythene) for disposal.
The supplier provides a 24-month warranty. The warranty does not apply to usual wear and tear (to the rubber ropes and stringing).
Hexagonal trampoline construction, including legs and handlebars, plus installation and usage instructions.